Sharp CD-XP120W - System Connections Guide; Component Connection Diagram

CD-XP120W
– 8 –
REMOVING AND REINSTALLING THE MAIN PARTS
TAPE MECHANISM SECTION
Perform steps 1 to 6 and 9 of the disassembly method to
remove the tape mechanism.
Figure 8-1
Figure 8-2
Figure 8-3
Figure 8-4Figure 8-5
How to remove the record/playback and erase
heads (TAPE 1) (See Fig. 8-1)
1. When you remove the screws (A1) x 2 pcs., the record/
playback head can be removed.
2. Move the hooks (A2) x 2 pcs., toward the center position as
shown in Fig. 8-1 and then lift the erase head.
How to remove the playback head (TAPE 2)
(See Fig. 8-2)
1. When you remove the screws (B1) x 2 pcs., the playback
head can be removed.
How to remove the pinch roller (TAPE 1)
(See Fig. 8-3)
1. When you remove the screw (C1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the pinch roller (TAPE 2)
(See Fig. 8-3)
1. When you remove the screw (D1) x 1 pc., the pinch roller
can be removed.
Note:
When installing the pinch roller, pay attention to the spring
mounting position.
How to remove the tape motor (See Fig. 8-4)
1. Remove the belt.
2. Remove the screws (E1) x 6 pcs., to remove the motor
bracket.
3. Remove the screws (E2) x 3 pcs., to remove the tape motor.
How to remove the belt (TAPE 1)
(See Fig. 8-5)
1. Remove the main belt (F1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (F2) x 1 pc.
How to remove the belt (TAPE 2)
(See Fig. 8-5)
1. Remove the main belt (G1) x 1 pc., from the tape motor side.
2. Remove the FF/REW belt (G2) x 1 pc.
Record/Playback
Head
Erase
Head
(A1)x1
ø2x3mm
(A1)x1
ø2x7mm
Hook
(A2)x2
TAPE 1
TAPE 2
(B1)x1
ø2x6mm
(B1)x1
ø2x6mm
Playback
Head
Tape
Motor
(E2)x3
Special Screw
Motor
Bracket
(E1)x2
ø2x4mm
(E1)x2
ø2x4mm
(E1)x2
ø2x4mm
Tape
Motor
Motor
Bracket
TAPE 2
Pinch Roller
TAPE 1
Pinch Roller
(C1)x1
ø2x4mm
(D1)x1
ø2x4mm
TAPE 2
TAPE 1
TAPE 2
Main Belt
(G1)x1
TAPE 1
Main Belt
(F1)x1
Tape
Motor
Tape
Motor
REW/FF
Clutch Ass'y
REW/FF
Clutch Ass'y
Main
Belt
(F1)x1
Main
Belt
(G1)x1
REW/FF
Belt
(G2)x1
REW/FF
Belt
(F2)x1