To Next PageTo Next Page
Need help?Do you have a question about the Sharp CP-C7000 and is the answer not in the manual?
General| Brand | Sharp |
|---|---|
| Model | CP-C7000 |
| Category | Stereo System |
| Language | English |
Precautions for protecting eyes from laser beam exposure during servicing.
Technical specifications of the laser diode used in the product.
Information on using the AC plug adaptor for voltage selection.
Overall technical details of the CD Mini System.
Technical details related to Video CD playback.
Technical details for the FM/AM tuner.
Technical details for the cassette tape deck.
Technical details for the CP-C7000 speaker system.
Identification and numbering of front panel components.
Identification and numbering of remote control components.
Identification of main and sub speaker components.
Description of indicators on the unit's display.
Identification of rear panel ports and controls.
Instructions for connecting the unit to the AC power supply.
How to set the AM tuning interval for your area.
Step-by-step guide to set the unit's clock time.
Guidelines for effective and proper use of the remote control.
Reasons for reset and important cautions during the process.
Important notes for safe and effective disassembly and reassembly.
Detailed procedure for taking apart the main CD unit.
Detailed procedure for taking apart the speaker system.
Procedures for removing and reinstalling tape mechanism parts.
Procedures for removing and reinstalling CD mechanism parts.
Adjustments for driving force and torque of the mechanism.
Adjustment procedures for AM IF/RF and FM RF sections.
Details on automatic adjustments performed by the CD system.
Procedures for entering different test modes for CD operation.
Table of error codes and their corresponding state descriptions.
Explanation of codes used for resistors and capacitors.
Block diagram of the MPEG controller and decoder ICs.
Block diagram of the servo DSP and video amplifier.
Block diagram of motor control and pickup unit.
Block diagram of tuner, tape, and audio processing circuits.
Block diagram of power supply, system microcomputer, and fan control.
Block diagram illustrating microphone input processing.
Detailed schematic of the Karaoke Printed Wiring Board.
Detailed schematic of the MPEG controller circuit.
Detailed schematic of the CD Video Printed Wiring Board.
Further details of the CD Video Printed Wiring Board schematic.
Detailed schematic of the Servo DSP control circuit.
Further details of the Servo DSP control circuit schematic.
Detailed schematic of the Main Printed Wiring Board.
Further details of the Main Printed Wiring Board schematic.
Detailed schematic of the tuner section on the Main PWB.
Detailed schematic of the Display Printed Wiring Board.
Schematic for volume motor and associated switch controls.
Detailed schematic of the power amplifier Printed Wiring Board.
Detailed schematic of the power supply Printed Wiring Board.
Wiring layout for the Main PWB-A1.
Wiring layout for Tape Mechanism PWB and associated switches.
Wiring layout for the Display PWB-A2.
Wiring layout for Jog PWB and associated switches.
Wiring layout for the Power Amplifier PWB-B2.
Wiring layout for Power Supply, Headphones, and Karaoke PWBs.
Wiring layout for the bottom view of CD Video PWB-C.
Wiring layout for top view of CD Video PWB-C and CD Motor PWB-F.
Wiring layout for the Tape Mechanism PWB-E.
List of voltage readings for various IC pins during operation.
Oscilloscope waveforms for IC2, illustrating circuit operation.
Oscilloscope waveforms for IC1, illustrating circuit operation.
Troubleshooting steps when the CD section fails to operate.
Steps for diagnosing issues preventing CD playback.
Diagnosing issues related to the focus and HF system.
Diagnosing issues related to the tracking system.
Diagnosing issues related to the spin system and turntable rotation.
Diagnosing issues with the PLL system and TOC data reading.
Troubleshooting when no sound is produced or there are dropouts.
Pin-out and function description for the Servo Amplifier IC.
Pin-out and function description for the Servo DSP IC.
Pin-out and function description for the System Microcomputer IC.
Pin-out and function description for the Driver IC.
Pin-out and function description for the Audio Processor IC.
Pin-out and function description for the Microphone Amplifier IC.
Pin-out and function description for the Key Control IC.
Pin-out and function description for the DRAM IC.
Pin-out and function description for the Video Operation Amp IC.
Pin connection details for the FL display module.
Decoding conventions for capacitor and resistor part numbers.
List of integrated circuits, transistors, diodes, and LEDs.
List of filters, transformers, coils, and capacitors.
List of variable resistors, capacitors, vibrators, and knobs.
List of connectors, fuses, and other miscellaneous parts.
List of replacement parts for the CD mechanism.
List of cabinet components, knobs, and accessories.
List of knobs, brackets, motors, and switches.
List of manuals, warranty cards, and speaker system components.
Detailed illustration of the CD mechanism assembly.
Illustration of the main unit's cabinet assembly (1/2).
Illustration of the main unit's cabinet assembly (2/2).
Illustration of the CP-C7000 speaker system assembly (1/2).
Illustration of the CP-C7000 speaker system assembly (2/2).
