GB-62
Number of 1 Time 2 Times 3 Times 4 Times
Times Pressed
Video Search Time Approx. 30 sec. Approx. 60 sec. Approx. 90 sec. Approx. 120 sec.
DPSS
Your Unit records a marker signal on the tape at the start of each
recording. These signals can be used later to locate the starting
point of a recording.
Press DPSS to locate a previous programme or the next
programme.
1 Load the video cassette into the Unit.
2 Press DPSS
three times. DPSS 3 will appear on the on-
screen display, and the Unit will fast forward to locate the third
recording after the current one.
3 Press DPSS once. DPSS -1 will appear on the on-screen
display and the Unit will rewind to locate the beginning of the
current recording.
4 To cancel the search before it has finished, press ■STOP or
ûPLAY.
• Recordings must be longer than 3 minutes.
• The starting point of playback may vary.
• This feature will only work with video tapes recorded on a VCR with the
DPSS feature.
Skip Search
With this feature, you can set a forward video search time to approx.
30, 60, 90 or 120 seconds of recorded material. After searching,
normal playback will resume automatically.
1 Press ûPLAY to start playback.
2 Press SKIP SEARCH.
The number of times you press SKIP SEARCH determines the
forward search time.
DPSS (Digital Program Search System) / Skip Search
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
SHOWVIEW
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVDAM/PM
INPUT SELECT
PAUSE/STILL
REC
SLOW
CH
VCR DVD
SKIP
DPSS
AUDIO
OUTPUT
PLAY
STOP
VCR/DVD COMBINATION
RRMCGA071WJSA
DPSS
Signals
Current tape position
Fast ForwardRewind
DPSS
Number
/
DVNC65SE054_062.pm6 8/10/02, 8:43 am62
Downloaded from: http://www.usersmanualguide.com/
To Next Page
Loading...
