E
Erik BensonAug 28, 2025
How to turn down the volume on my Sharp Printer?
- MmargaretporterAug 28, 2025
To adjust the volume of the sounds produced by your Sharp Printer, modify the settings for the beep, ring, speaker, and alarm sounds.
To Next PageTo Next PageHow to turn down the volume on my Sharp Printer?
To adjust the volume of the sounds produced by your Sharp Printer, modify the settings for the beep, ring, speaker, and alarm sounds.
Why is the scanned image from my Sharp Printer dirty?
If the scanned image from your Sharp Printer is dirty, it might be because the exposure glass or ADF is dirty. Clean them. Also, ensure that toner or correction fluid is dry before placing originals on the exposure glass.
How to fix Sharp DX-C200 when paper does not feed smoothly?
If the paper does not feed smoothly in your Sharp Printer: * Use supported types of paper. * Load paper correctly, ensuring the paper guides are properly adjusted. * If the paper is curled, straighten it. * Take out the paper from the tray, fan it well, reverse the top and bottom, and put it back in the tray.
Why is my Sharp DX-C200 Printer feeding multiple sheets of paper?
If your Sharp Printer is feeding multiple sheets of paper at one time, try the following: * Fan the paper well before loading, and ensure the edges are even. * Make sure the paper guides are in the right position. * Use supported types of paper. * Load paper only as high as the upper limit markings on the paper guide. * Ensure the friction pad, paper feed roller, or registration roller is clean. * Only add paper when there is none left in the tray.
Why is the photocopied paper from my Sharp Printer dirty?
If the photocopied paper from your Sharp Printer is dirty, consider the following: * Adjust the image density, as it may be too high. * Avoid touching printed surfaces immediately after copying, and remove freshly printed sheets one by one. * Ensure the exposure glass or ADF is clean. * Before placing originals on the exposure glass, make sure that toner or correction fluid is dry.
How do I lighten or darken copies on my Sharp Printer?
If the copied pages from your Sharp Printer are too dark or too light, you can adjust the image density.
How to adjust the scan image that is too dark or too light on Sharp DX-C200?
If the scanned image from your Sharp Printer is too dark or too light, you should adjust the image density.
General| Functions | Print, Copy, Scan |
|---|---|
| Print Technology | Laser |
| Print Speed | 20 ppm |
| Print Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Copy Speed | 20 cpm |
| Paper Capacity | 250 sheets |
| Connectivity | USB 2.0 |
| Scanner Type | Flatbed |
| Paper Size | A4 |
