16 | P a g e
If printing is blurry even when the ink roller is in the proper
position, replace the roller.
Ink roller: IR40T
APPLYING INK TO WORN INK ROLLER OR USE OF
UNAPPROVED INK ROLLER MAY CAUSE SERIOUS
DAMAGE TO PRINTER.
1. Set the power switch to OFF.
2. Remove the printer cover. (Fig. 1)
3. Hold the top of the ink roller and remove the roller by pulling
it toward you and then upward. (Fig. 2)
4. Install the new ink roller in the correct position. Make sure
that the roller is securely in place. (Fig. 3)
5. Put back the printer cover.
To Next Page
Loading...
