Sharp ER-A520 - Standard Key Number Layout; Keys and Switches Functions; Mode Switch and Mode Keys; Drawer Lock Key

ER-A520U/A530U Service mode programming
3 – 12
FILE TABLE
Note: All memories are shared in the fixed RAM area.
[JOB#996, 998] RAM DATA BACKUP function
(ECR
0
ECR: 01FD/02FD.exe Protocol)
• Sending ECR RAM data
• Receiving ECR RAM data
*The Baud-rate is determined by SRV#903-A. The auto baud-rate
function is not available in this model.
[Signal connection chart]
GROUP
NUMBER
FILE NAME TYPE
FILE TABEL NO.
(CREATE/ERASE)
1DEPT 1
2 DEPT TEXT (8) 0
3 DEPT TEXT (16) 0
4PLU/UPC 1
5 PLU/UPC PRICE 1 0
6 PLU/UPC PRICE 1-6 0
7 PLU/UPC TEXT1 (8) 0
8 PLU/UPC TEXT1 (16) 0
9 PLU/UPC TEXT1 (12) 0
10 PLU/UPC TEXT1-6 (8) 0
11 PLU/UPC TEXT1-6 (16) 0
12 PLU/UPC KP TEXT1-6 (12) 0
13 PLU STOCK 0
14 DYNAMIC PLU UPC 1
15 DYNAMIC PLU PRICE 1 0
16 DYNAMIC PLU PRICE 1-6 0
17 DYNAMIC PLU TEXT1 (8) 0
18 DYNAMIC PLU TEXT1 (16) 0
19
DYNAMIC PLU KP TEXT1 (12) 0
20 DYNAMIC PLU TEXT1-6 (8) 0
21 DYNAMIC PLU TEXT1-6 (16) 0
22
DYNAMIC PLU KP TEXT1-6 (12) 0
23 UPC PGM PICK UP 1
24
DYNAMIC UPC PGM PICK UP 1
25 UPC X/Z PICK UP 1
26 DYNAMIC UPC X/Z PICK UP 1
27 LINK PLU 1
28 SET PLU 1
29 CONDIMENT TABELE 1
30 MIX & MATCH TABELE 1
31 SERVER 1
32 REG BUFFER 1
33 OVER LAPPED SERVER 0
34 GLU/PBLU 2
35 CLOSE GLU 1
36
AUTO GLU GENERATE CODE 1
37 KP BUFFER 0
38 BS/BT BUFFER 0
39 TERM DEPT 0
40 TERM PLU/UPC 0
41 TERM TRANCESACTION 0
42 TERM SERVER 0
43 TERM DYNAMIC UPC 0
44 ALL OF TERM FILE 0
TYPE 0 = Create/Erase only
TYPE 1 = Create/Erase and Increase/Decrease the number of records.
TYPE 2 = Create/Erase and Increase/Decrease the number of records
for label and data invidually.
996
0
SSR data only
CA/AT
@/FOR
ALL DATA
998
CA/AT
@/FOR
SD 2 SD
RD
CTS
RD
3
6
5
3
2
6
8
75 SG
1 FG
RTS
4
DCD
8
DTR 20
DSR
7
1
4
CTS
SG
RTS
DCD
DTR
DSR
25PIN D-S
ECR
UB 9PIN D-SUB
SD 3 SD
RD
CTS
RD
2
6
8
3
2
6
8
55 SG
RTS
7
DCD
1
DTR 4
DSR
7
1
4
CTS
SG
RTS
DCD
DTR
DSR
9PIN D-S
ECR
UB 9PIN D-SUB
FRAME GROUND is connected to
the shield of the cable.
SD:
RD:
DTR:
DSR:
RTS:
DCD:
CTS:
FG:
SEND DATA
RECEIVE DATA
DATA TERMINAL READY
DATA SET READY
REQUEST TO SEND
DATA CARRIER DETECTOR
CLEAR TO SEND
FRAME GROUND