Sharp ER-A520 Programming Manual

ER-A520/ER-A530 REPORT MODES (OP X/Z, X1/Z1 and X2/Z2)
4 – 1
CHAPTER 4. REPORT MODES (OP X/Z, X1/Z1 and X2/Z2)
In general, the following sales reports are available:
1) OP X/Z reports (individual Server/Chashier reports)
2) X1/Z1 reports (Daily sales total X and Z reports)
3) X2/Z2 reports (Periodic total X and Z reports)
4) Flash-read reports (Display sales amount)
In addition to the above reports that are to be used, reports for checking
the program are also available.
[Purpose]
The below reports are each used to check sales data. The intended
method of taking these reports are as follows:
OP X/Z reports: These reports are taken by operators in order to report
their own sales data.
X1/Z1 reports: These reports are taken by the supervisor or manager
in order to check and report daily sales totals at that
point.
X2/Z2 reports: These reports are taken by the owner or manager in
order to check and report periodic (weekly or monthly)
totals.
Flash-read: These reports are taken by the owner or manager in
order to check and display sales totals for spontaneous
checking.
[Operation]
In the table below: those reports marked with a circle “o” can be executed.
PRINTING REPORT
REPORT NAME JOB#
MODE
*1
DATA FOR READINGOPX/Z X1/Z1 X2/Z2
X Z X1 Z1 X2 Z2
GENERAL x00
ooooDEPT CODE *2
DEPT (ALL GROUP) x10 ooGROUP No. *4
DEPT (INDIVIDUAL GROUP) x12
oo *3
DEPT GROUP TOTAL x13
oo *2
PLU/UPC SALES x20
ooooPLU/UPC (EAN) CODE *10
PLU/UPC SALES (PICK UP) x09
ooooPICK UP *11
PLU/UPC SALES (DEPT) x21
ooooDEPT CODE *3
PLU/UPC (INDIVIDUAL GROUP) x22
oo *3
PLU GROUP TOTAL x23
oo *2
PLU/UPC STOCK x24
o PLU/UPC (EAN) CODE *10
PLU/UPC STOCK (PICK UP) x04
o PICK UP *11
PLU/UPC ZERO SALES x27
oo *2
PLU/UPC ZERO SALES (DEPT) x27
ooDEPT CODE *3
PLU/UPC PRICE CATEGORY x29
ooPRICE *4
DYNAMIC UPC x69
oo UPC (EAN) CODE *10
DYNAMIC UPC (PICK UP) x65
oo PICK UP *11
DYNAMIC UPC (DEPT) x66
oo DEPT CODE *3
DYNAMIC UPC CLEAR x68
oo UPC (EAN) CODE *10
DYNAMIC UPC CLEAR (PICK UP) x64 oo PICK UP *11
DYNAMIC UPC CLEAR (DEPT) x67
oo DEPT CODE *3
TRANSACTION x30
oo *2
CID x31
oo *2
COMMISSION x32
oo *2
TAX x33
oo *2
SERVER (ALL) x40
ooooCCD ENTRY *2, *7
SERVER (INDIVIDUAL) x41
oo CCD ENTRY *2, *5, *7
x41
ooooSERVER CODE, CCD ENTRY *6, *7
HOURLY (ALL) x60
oo *2
HOURLY (RANGE) x60
o TIME *4
DAILY NET x70
oo *2

Sharp ER-A520 Specifications

General

Brand	Sharp
Model	ER-A520
Category	Cash Register
Language	English