Sharp ES-NFH014CWC-EN User Manual

EN - 18
NOTE: If you put less than
halfthemaximumloadoflaundryinto
yourmachinethehalf-loadfunctionwill
beautomaticallyset,regardlessofthe
programyouselected.Thismeansthat
theselectedprogramwilltakelesstime
tocompleteandwilluselesswaterand
energy.Whenyourmachinedetects
half load, the symbolisdisplayed
automatically.
10. No Spin(*)
Auxiliaryfunctionbutton3or 4 NoSpin
If you don’t want to perform wringing on
your laundry, you can use this auxiliary
function. You may make the program
active by pressing the wringing cancel
button on the display panel when the led
light of the symbol turns on.
11. Cold Wash(*)
Auxiliaryfunctionbutton3or 4 Cold Wash
Youcanusethisauxiliaryfunctionwhen
youwanttowashyourlaundrywithcold
water (tap water). You may make the
programactivebypressingthecold
washingbuttononthedisplaypanelwhen
theledlightofthe symbol turns on.
(*)Machineryspecificationsmayvary
dependingontheproductpurchased.
Start/Pause button
BypressingontheStart/Pausebutton,
you may start the program you have
selectedorsuspendarunningprogram.
Ifyouswitchyourmachinetothestandby
mode, the Start/Pause led on the
electronicdisplaywillblink.
5.8 Child Lock
The Child Lock function allows you to
lock the buttons so that the wash cycle
you have chosen cannot be changed
unintentionally.
To activate child lock, press and hold
button 2 and 3 simultaneously for at
least 3 seconds. ‘’CL’’ will flash on the
electronic display for 2 seconds when the
child lock is activated.
If any button is pressed or selected
program is changed by the program dial
while the child lock is active, the “CL”
symbol will flash on the electronic display
for 2 seconds.
If the child lock function is active and a
program is running, when the program
dial is turned to the CANCEL position
and another program is selected the
previously selected program continues
from where it was left.
To deactivate the child lock, press and
hold button 2 and 3 simultaneously for at
least 3 seconds until the “CL” symbol on
the electronic display disappears.

Sharp ES-NFH014CWC-EN Specifications

General

Brand	Sharp
Model	ES-NFH014CWC-EN
Category	Washer
Language	English