EasyManua.ls Logo

Sharp FO-11 - User Manual

Sharp FO-11
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
MODEL
OPERATION MANUAL
FACSIMILE
1. Installation
2. Sending Faxes
3. Receiving Faxes
4. Making Copies
5. Making Telephone Calls
6. Answering Machine Connection
7. Special Functions
8. Printing Lists
9. Maintenance
10. Troubleshooting
FO-11/FO-51/FO-71
FO-11/FO-51/FO-71


Table of Contents

Questions and Answers

  • R
    ricardojamesSep 3, 2025
    Why are received images distorted on Sharp FO-11 Fax Machine?
    • C
      Cheryl ChavezSep 3, 2025
      If the received images from your Sharp Fax Machine are distorted, it could be due to noise on the telephone line. Ask the sender to resend the document. Try making a copy or printing a report on your fax machine. If the copy or report is also distorted, your fax machine may need service.
  • B
    brianna67Sep 2, 2025
    Why is dialing not possible on Sharp FO-11?
    • E
      erobertsSep 2, 2025
      If your Sharp Fax Machine is not dialing, check that the power cord is properly plugged into a power outlet. Also, ensure the telephone line is correctly connected to both the TEL. LINE socket and the wall socket. Finally, verify that the fax machine is set to the correct dialing mode for your telephone line.
  • T
    Tony MontgomeryAug 31, 2025
    What to do if Sharp FO-11 power is on, but no reception takes place?
    • M
      Michele TaylorAug 31, 2025
      If your Sharp Fax Machine is on but no reception takes place, make sure that the telephone line cord is plugged into the TEL. LINE socket, and not the TEL. SET socket.
  • P
    Penny BaileyAug 29, 2025
    Why does Sharp Fax Machine print blank pages when receiving?
    • D
      Deborah HarveyAug 29, 2025
      If your Sharp Fax Machine prints blank pages when receiving a document, ensure the document is loaded correctly in the transmitting machine's feeder. Try making a copy or printing a report to test your machine's printing capability. Also, check that the thermal paper is correctly loaded in your fax machine.
  • H
    Haley RodriguezAug 27, 2025
    Why no reception occurs when polling is attempted on Sharp FO-11?
    • R
      Robin MartinAug 27, 2025
      If your Sharp Fax Machine isn't receiving when polling is attempted, ensure you haven't run out of paper. Also, check that the transmitting machine is in automatic reception mode. If the transmitting machine uses polling security, verify that your fax number is entered in both machines.
  • S
    Stacy SanchezAug 27, 2025
    What to do if Sharp FO-11 power is on, but no transmission takes place?
    • J
      jennifer14Aug 27, 2025
      If your Sharp Fax Machine is on but no transmission occurs, check that the receiving machine has paper and that the telephone line cord is plugged into the TEL. LINE socket, not the TEL. SET socket. Also, if the receiving machine is in manual mode without an attendant, reception won't be possible. Check the display for error messages and pick up the handset to check for a dial tone.
  • C
    Christian WelchAug 25, 2025
    How to fix poor copy quality and dark lines on Sharp Fax Machine?
    • P
      pamelaromeroAug 25, 2025
      If your Sharp Fax Machine has poor copy quality or shows dark vertical lines, the scanning glass might be dirty. Clean the scanning glass.
  • H
    hansenvirginiaAug 22, 2025
    Why does Sharp FO-11 Fax Machine interrupt voice calls on extension phone?
    • J
      Jill RogersAug 23, 2025
      If voice calls are interrupted by the fax on your Sharp Fax Machine, especially when using an extension phone, it might be because the reception mode is set to A.M. To prevent this on a tone dial extension, press any three keys on the extension phone after answering.

Summary

Important Safety Information

Operation Panel Overview

1. Installation

Connections

Instructions for connecting handset, power, and telephone line.

Loading the Thermal Paper

Step-by-step guide for loading thermal paper into the fax machine.

2. Sending Faxes

Loading the Document

How to load documents into the feeder for transmission.

Sending a Fax by Normal Dialling

Steps to send a fax by manually dialling the recipient's number.

Sending a Fax by Automatic Dialling

Methods for sending faxes using stored numbers (Rapid Key, Speed Dial).

3. Receiving Faxes

6. Answering Machine Connection

Connecting an Answering Machine

Guide to physically connect an answering machine to the fax.

10. Troubleshooting

Problems and Solutions

Common issues and their troubleshooting steps, including line errors.

Messages and Signals

Explanations of display messages and audible signals.

Clearing Paper Jams

Procedures for removing jammed documents or printing paper.

Sharp FO-11 Specifications

General IconGeneral
Paper Capacity50 sheets
Automatic Document Feeder (ADF)10 sheets
Printing MethodThermal Transfer
TypePlain Paper Fax
CompatibilityG3
Paper SizeA4
Print Resolution203 x 391 dpi

Related product manuals