SCANNER AND FAX FUNCTIONS
118
If needed, adjust the exposure level for TEXT ( )
or PHOTO ( ).
For a darker image, press the [ ] key ( ). For a
lighter image, press the [ ] key ( ).
(When COLOR or GRAY mode is selected.)
Adjust the exposure level.
For a darker image, press the [ ] key ( ). For a
lighter image, press the [ ] key ( ).
5
Press the [START] key ( ) to begin scanning.
Using the Network Scanner Function
Basic Transmission Procedure
1
Press the [MODE SELECT] key to select
scanner mode. The "SCAN" indicator
lights up to indicate that scanner mode is
selected.
2
Make sure that the "SCAN USING: USB/
NETWORK" is shown on the display. Then
press [OK] to enter Scan to USB and
Network Scan mode.
(The initial display will be "SCAN USING: SCAN
TO USB".)
3
Place the original in the document feeder tray or on the
document glass.
For information on how to place the original, see "Image orientation and
standard original loading orientation" (p.123).
4
Select "ADDRESS SEARCH" and then
press the [OK] key.
The selections change as follows each time the
[ ] key ( ) is pressed: "INPUT ADDRESS" →
"GLOBAL ADDRESS" → "ADDRESS SEARCH".
If you continue to press the [ ] key ( ), the
stored destinations will appear in alphabetical
order based on the initial stored for each
destination.
SCAN USING:
ADDRESS SEARCH
To Next Page
Loading...
