16
2
Chapter 2
LOADING PAPER
The tray location indicator will blink when there is no paper in the selected paper
tray, or when the selected paper tray is not closed or is improperly closed.
PAPER
For best results, use only SHARP recommended paper.
*
1
The number of sheets of paper that can be loaded varies depending on the weight of
the paper.
*
2
Do not use non-standard envelopes or envelopes that have metal clasps, plastic
snappers, strings, windows, linings, self-adhesive strips, patches or synthetic materials.
Do not use envelopes that are filled with air or envelopes that have labels or stamps
attached. These will damage the machine.
*
3
When using paper heavier than 28lbs. (104 g/m
2
), use paper that is 8-1/2" x 11" or
smaller.
Paper tray type Paper type Size Weight Capacity
Paper tray Standard paper
Recycled
paper
5-1/2" x 8-1/2" (Invoice)
8-1/2" x 11" (Letter)
8-1/2" x 13" (Foolscap)
8-1/2" x 14" (Legal)
15 lbs. to 21 lbs.
(56 g/m
2
to 80 g/m
2
)
250 sheets *
1
(The paper
should not
exceed the
line on the
tray)
Bypass tray Standard paper
Recycled
paper
3-1/2" x 5-1/2" to
8-1/2" x 14"
15 lbs. to 21 lbs.
(56 g/m
2
to 80 g/m
2
)
50 sheets *
1
Thick paper
28 lbs. to 34.5 lbs.
(106 g/m
2
to 128 g/m
2
)*
3
Load one
sheet at a time
in the bypass
tray.
Transparency
film/Labels
Envelopes *
2
Monarch
(3-7/8" x 7-1/2")
Commercial 9
(3-7/8" x 8-7/8")
Commercial 10
(4-1/8" x 9-1/2")
To Next Page
Loading...
