59
BASIC PRINTING
The following example explains how to print a document from WordPad.
Before printing, make sure that the correct size of paper for your document has been
loaded in the machine.
1
Start WordPad and open the document that you wish to print.
2
Select "Print" from the application's
"File" menu.
The "Print" dialog box will appear.
3
Make sure that "SHARP XX-XXXX" is selected as the printer. If
you need to change any print settings, click the "Preferences"
button to open the printer driver setup screen.
The printer driver setup screen will appear.
Windows 2000 does not have the "Preferences" button in this dialog box.
Select settings as needed on each of the tabs in the setup screen.
☞"PRINTER DRIVER SETTINGS" (p.62), "TWO-SIDED PRINTING" (p.63),
"PRINTING MULTIPLE PAGES ON ONE PAGE" (p.65),
"FITTING THE PRINTED IMAGE TO THE PAPER" (p.66),
"ROTATING THE PRINT IMAGE 180 DEGREES" (p.67),
"PRINTING A WATERMARK" (p.68)
4
Click the "Print" button.
Printing begins.
The print job is delivered to the output tray, with the position of the paper
offset slightly from the previous job (offset function).
To Next Page
Loading...
