SCANNER AND FAX FUNCTIONS
96
Storing scanning settings - Network Scanning
1
Click "Network Scanning" in the
menu frame of the Web page.
2
Click "Add" below the scan list.
If you need to change the settings in a
previously stored scan mode, select the
scan mode and click "Edit". To delete a
scan mode, select the scan mode and click
"Delete".
3
Select the desired scanning settings.
Refer to the following table for information on each setting.
4
When you have finished selecting the settings, click "Submit".
The selected settings are stored.
Scan Mode settings
Item Description
Default
setting
Name
Enter a name for the scan mode (up to 32
characters).
—
Color Mode
Select Full Color, Grayscale, or Mono 2 gradation for
the color mode.
Full Color
Resolution Select the resolution. 150 dpi
Void Area
Select "On" to not scan the 4 mm around the edges
of the image and instead attach a white border.
Off
To Next Page
Loading...
