Why is reception or copying interrupted on Sharp Fax Machine?
If your Sharp Fax Machine is interrupting reception or copying, it may be overheating. Turn off the power and allow it to cool down.
Why no dial tone when I pick up the handset on Sharp FO-51?
If you don't hear a dial tone when you pick up the handset or press the SPEAKER key on your Sharp Fax Machine, ensure the handset cord is connected to the correct socket.
What to do if Sharp Fax Machine does not respond when pressing keys?
If the Sharp Fax Machine doesn't respond when you press its keys, and no beep sound is heard, unplug the power cord and plug it back in after a few seconds.
What to do if LINE ERROR appears on Sharp FO-51?
If a LINE ERROR appears on the display of your Sharp Fax Machine, try the transaction again. If the error persists: * Ensure the cord from the TEL. LINE socket to the wall socket is no longer than two meters. * Verify that no modem devices are sharing the same telephone line. * Confirm with the other party that their fax machine is functioning correctly. * Check your telephone line for noise. * Try connecting the fax machine to a different telephone line. * If the problem continues, your fax machine may require service.
Why nothing appears in the display of my Sharp FO-51 Fax Machine?
If nothing appears on the display of your Sharp Fax Machine, ensure the power cord is properly plugged into a power outlet. You can also test the outlet by connecting another electrical appliance to see if it receives power.
Why answering machine connection does not operate properly on Sharp Fax Machine?
If the Sharp Fax Machine's answering machine connection isn't working, ensure the reception mode is set to A.M. Check that the TEL. LINE socket is connected to the wall and the TEL. SET socket to the answering machine's line socket. The outgoing message should be under 10 seconds, and the Quiet Detect Time should be three or four seconds.
Why are received images distorted on Sharp Fax Machine?
If the received images from your Sharp Fax Machine are distorted, it could be due to noise on the telephone line. Ask the sender to resend the document. Try making a copy or printing a report on your fax machine. If the copy or report is also distorted, your fax machine may need service.
Why is dialing not possible on Sharp Fax Machine?
If your Sharp Fax Machine is not dialing, check that the power cord is properly plugged into a power outlet. Also, ensure the telephone line is correctly connected to both the TEL. LINE socket and the wall socket. Finally, verify that the fax machine is set to the correct dialing mode for your telephone line.
What to do if Sharp FO-51 Fax Machine power is on, but no reception takes place?
If your Sharp Fax Machine is on but no reception takes place, make sure that the telephone line cord is plugged into the TEL. LINE socket, and not the TEL. SET socket.
Why does Sharp FO-51 Fax Machine print blank pages when receiving?
If your Sharp Fax Machine prints blank pages when receiving a document, ensure the document is loaded correctly in the transmitting machine's feeder. Try making a copy or printing a report to test your machine's printing capability. Also, check that the thermal paper is correctly loaded in your fax machine.
General| Brand | Sharp |
|---|---|
| Model | FO-51 |
| Category | Fax Machine |
| Language | English |
To Next Page
