Remote Operations
44
Turning the Transfer function on or off
To turn Transfer on: Press , , and on the telephone.
To turn Transfer off: Press , , and on the telephone.
9 1
9
2
Changing the transfer telephone number
1 Press , , and on the telephone.
2 After you hear a short beep, enter the new telephone number. When
finished, press .
• To insert a pause between any two digits of the number, press .
9 0
Recording a new transfer message
1 Press , , and on the telephone.
2 When you hear a short beep, speak into the telephone to record the new
message.
• The time for the transfer message is fixed at 15 seconds. After 15 seconds
(or earlier if the machine detects silence after you finish speaking), you will
hear a beep, and the new message will be played back automatically.
9 3
all.book Page 44 Monday, September 29, 2003 4:48 PM
To Next Page
Loading...
