Adjusting the Resolution and Contrast
48
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
Resolution settings
STANDARD Use STANDARD for ordinary documents. This
setting gives you the fastest and most
economical transmission.
FINE Use FINE for documents containing small letters
or fine drawings.
SUPER FINE Use SUPER FINE for documents containing
very small letters or very fine drawings.
HALF TONE Use HALF TONE for photographs and
illustrations. The original will be reproduced in
64 shades of gray.
3 Adjust the resolution and/or contrast settings as explained in
Resolution and Contrast below, then dial the receiving machine as
explained on page 50.
You must adjust the
settings each time
you don't want to use
the default settings.
The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a
document.
all.book Page 48 Monday, September 29, 2003 4:48 PM
To Next Page
Loading...
