What to do if my Sharp Fax Machine displays 'OVER HEAT'?
If your Sharp Fax Machine displays 'OVER HEAT', it means the print head has overheated. Operation can continue after it cools down. If overheating happens often, try setting the print contrast to LIGHT.
Why does a distorted image get received at the other end from my Sharp FO-P610 Fax Machine?
If a distorted image is received from your Sharp Fax Machine, noise on the telephone line may be the cause. Try sending the document again. If a copy made on your fax machine is also distorted, your fax machine may need service.
Why can't auto-dial numbers be stored in my Sharp Fax Machine?
If you can't store auto-dial numbers in your Sharp Fax Machine, make sure the fax is plugged in and the imaging film has been loaded. Auto-dial numbers cannot be stored without imaging film.
Why is reception or copying interrupted on my Sharp Fax Machine?
If reception or copying is interrupted on your Sharp Fax Machine, the print head may be overheating from prolonged use. Turn off the power and let it cool down. If this frequently occurs, try setting the print contrast to LIGHT.
Why does the printing paper come out blank when receiving a document on my Sharp FO-P610 Fax Machine?
If printing paper comes out blank when receiving a document on your Sharp Fax Machine, ensure the document is loaded properly in the transmitting machine's feeder. Make a copy or print a report to confirm your machine's printing ability.
Why does a loud howling sound occur when using the speaker on my Sharp Fax Machine?
A loud howling sound (feedback) may occur if you replace the handset while the speaker is on your Sharp Fax Machine. Turn off the speaker before replacing the handset to avoid this.
Why is the power on, but no transmission takes place on my Sharp Fax Machine?
If your Sharp Fax Machine has power but won't transmit, ensure the receiving machine has paper. Verify the telephone line cord is in the TEL. LINE socket, not the TEL. SET socket. If the receiving machine is in manual mode without an attendant, reception isn't possible. Check the display for error messages and listen for a dial tone.
Why is nothing printed at the receiving end from my Sharp FO-P610?
If nothing prints at the receiving end from your Sharp Fax Machine, ensure the document for transmission is placed face down in the feeder.
What to do if my Sharp FO-P610 displays 'CHECK PAPER SIZE'?
If your Sharp Fax Machine shows 'CHECK PAPER SIZE', it means an incorrect paper size is loaded. Remove the paper and load A4-size paper.
Why is the received document faint on my Sharp Fax Machine?
If received documents are faint on your Sharp Fax Machine, ask the sender to send documents with higher contrast. If the contrast remains too low, your fax machine may require servicing. Make a copy or print a report to assess your machine’s printing capability.
General| Type | Plain Paper Fax |
|---|---|
| Modem Speed | 33.6 Kbps |
| Transmission Speed | 6 seconds per page |
| Paper Size | A4, Letter, Legal |
| Automatic Document Feeder Capacity | 10 sheets |
| Print Technology | Laser |
| Memory | Approx. 512 KB |
To Next Page
