Sharp FP-F30Y User Manual

E-10
Before calling for repair, please review the list below, since the problem may not be a unit malfunction
.
TROUBLESHOOTING
SYMPTOM REMEDY (not a malfunction)
Dust and smoke are not removed.
•Clean or replace the filter if they appear to be heavily
soiled.(Refer to E-8,E-9
)
A clicking or ticking sound is heard
from the unit.
• Clicking or ticking sound may be audible when the unit
is generating ions.
The discharged air has an odour.
•Check to see if the lter are heavily soiled.
Replace the lter.
•Plasmacluster Air Purifiers emit small traces of ozone
which may produce an odour. These ozone emissions
are well below safety levels.
The Plasmacluster Ion Indicator
doesn’t Light on.
•Check to see if the SLEEP mode is selected.
The Plasmacluster Ion Indicator Light is turned off
3 seconds after the SLEEP mode is selected.
•Check to see if the Plasmacluster Ion OFF is selected.
Press
to light on.
•Check to see if the Light Control is selected.
Press
for 3 seconds to light On.
OM_FP-F30Y_EN-ID.indd 10 2/9/2558 BE 4:04 PM

Sharp FP-F30Y Specifications

General

Brand	Sharp
Model	FP-F30Y
Category	Air Cleaner
Language	English