EasyManuals Logo

Sharp FU-P40S User Manual

Sharp FU-P40S
36 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
ENGLISH
E-5
Battery Information
The battery life is about 1 year.
The batteries for this remote control are for initial use only . Change the batteries
when necessary.
Incorrect usage of the batteries may cause battery fluid leakage and/or damage.
Take care of the following when handling:
•When replacing the batteries, replace both batteries with new ones of the same
type. (Use 2 AA manganese batteries.)
•When not using the unit or remote control for an extended period, remove the
batteries.
• The batteries are for initial use only and may be depleted within 1 year.
INSERTING BATTERIES IN THE REMOTE CONTROL
1
Remove the back cover
Press and slide the back cover to
remove.
2
Insert batteries
Insert batteries with and as
shown below.
3
Close the back cover
REMOTE CONTROL USE
Operate with the remote control facing the main
unit receiver.
The signal range is about 7m.
•Make sure there are no objects blocking the
path of the signal.
•A beep sound will be heard from the main unit
when a signal is received.
NOTE
•Avoid dropping or damaging the remote
control, using in a high humidity condition, in
direct sunlight or near a heat source.
Receiver
Transmitter
PREPARATION

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp FU-P40S and is the answer not in the manual?

Sharp FU-P40S Specifications

General IconGeneral
BrandSharp
ModelFU-P40S
CategoryAir Cleaner
LanguageEnglish

Related product manuals