PREPARATION
To maintain the quality of the filters, they are installed in the main unit within plastic bags.
Be sure to remove the filters from the plastic bags before using the unit.
1
Remove the filters
1
Remove the Front Panel.
Pull the bottom of the Front Panel.
3
Remove the Active Carbon Filter
(black) and HEPA Filter (white) from
the plastic bags.
E-6
Be sure to remove the power plug from the wall outlet.
FILTER INSTALLATION
2
Pull out the Filter Frame and remove
the Pre-Filter, Active Carbon Filter and
HEPA Filter.
Front Panel
Filter Frame
Pre-Filter
Pre-Filter
Active Carbon Filter
HEPA Filter
Filter Frame
Active Carbon Filter
HEPA Filter
To Next Page
Loading...
