Washable Active
Carbon Filter
2
Drip dry lter to remove excess water.
1
Rinse dirt from the WASHABLE ACTIVE CARBON
FILTER under lukewarm water.
Remove dust on the washable active carbon lter before washing.
• When washing the lter for the rst time, the rinse water may be
brown. This does not affect deodorization performance.
• Avoid bending or folding the lter when washing.
3
Dry filter completely in a well ventilated area. If
possible, dry outdoors.
Dry lter in a sideways position to avoid warping of the lter.
The lter takes about 6 hours to dry out.
4
Replace the lter in unit. (See E-6).
Dry lter completely before replacing to prevent odours.
Do not operate unit without all lters properly installed.
HEPA Filter
• Avoid drying lter outdoors during inclement weather (e.g. rain or cold
temperatures).
• Do not allow lter to freeze.
• If lter is dried indoors, take precautions, such as placing towels, etc
under the lter to prevent water damage to the oor.
To Next Page
Loading...
