PREPARATION
To maintain the quality of the lters, they are installed in the main unit and packed in
plastic bags. Be sure to remove the lters from the plastic bags before using the unit.
Remove the lters
Remove the Front Panel.
E-6
Be sure to remove the power plug from the wall outlet.
FILTER INSTALLATION
Remove the Filter Support.
Pull the Front Panel on the
lower sides, and lift up.
3
2
1
Front Panel
Push in the hooks on top, then pull the Filter Support.
Remove the Washabe Active Carbon Filter (Black) and
HEPA Filter (White) from the plastic bags.
Filter Support
HEPA Filter
Active Carbon Filter
To Next Page
Loading...
