E-14
1. Place the cable with charging head at the end to the charging terminal on the
unit as shown.
2. The unit’s red indicator lights up to indicate under charging.
3. The unit’s blue indicator lights up to indicate fully charged.
Before using any adapter with the charging cable, check whether the specications
of the adapter meets the requirements.
The recommended output voltage of the adapter is DC5V+/-0.25V, and the
recommended output current is 0.5A. An over-high charging voltage may damage
the charging cable and unit.
Warning :
Use the recommended adapter whenever possible. Use of other types of adapters
may violate the warranty terms of the equipment and is hazardous. Use the provided
charging cable to connect with a certied adapter or computer to charge the unit.
Charging operation
Charging the unit
To Next Page
Loading...
Need help?
General
