Sharp HT-CN400DVH - Speaker Configuration

– 52 –
HT-CN400DVH/HT-CN400DVE/HT-CN500DVH/HT-CN500DVE
IC106 92LRCI6028-001: Microcomputer (ES6028) (5/5)
Port NamePin No. Input/Output
Function
163 VSS Input Ground.
164 VEE Input I/O power supply.
165 AUX3 Input/Output Auxiliary ports 3.
IOR# Output I/O read strobe.
166 AUX4 Input/Output Auxiliary ports 4.
167 AUX5 Input/Output Auxiliary ports 5.
168 AUX6 Input/Output Auxiliary ports 6.
169 AUX7 Input/Output Auxiliary ports 7.
170 LOE# Output Device output enable.
171 VSS Input Ground.
172 VCC Input Core power supply.
173* LCS0# Output Chip select 0.
174 LCS1# Output Chip select 1.
175 LCS2# Output Chip select 2.
176 LCS3# Output Chip select 3.
177 VSS Input Ground.
178-182 LD0-LD4 Input/Output EPROM device data bus.
183 VEE Input I/O power supply.
184 VSS Input Ground.
185-191 LD5-LD11 Input/Output EPROM device data bus.
192 VSS Input Ground.
193 VEE Input I/O power supply.
194-197 LD12-LD15 Input/Output EPROM device data bus.
198 LWRLL# Output Device low-byte write enable.
199 LWRHL# Output Device high-byte write enable.
200 VSS Input Ground.
201 VEE Input I/O power supply.
202* CAMIN0 Input Camera YUV 0.
203* CAMIN1 Input Camera YUV 1.
204-207 LA0-LA3 Output Device address output.
208 VSS Input Ground.
In this unit, the terminal with asterisk mark (*) is (open) terminal which is not connected to the outside.