– 8 –
HT-CN400DVW/HT-CN400DVA/HT-CN500DVW/HT-CN500DVA
1 Top Cabinet 1. Screw ...................... (A1) x7 8-1
2. Pull to the arrow direction.
2 Rear Panel with 1. Screw .................... (B1) x11 8-2
Fan Motor 2. Socket ..................... (B2) x1
3 Main PWB 1. Screw ...................... (C1) x5 8-3
2. PWB Shield Cover .. (C2) x1
3. Socket ..................... (C3) x6 8-4
4. Socket ..................... (C4) x1
(HT-CN400DVW/
HT-CN500DVW Only)
5. Flat Cable ............... (C5) x2
6. PWB Holder ........... (C6) x1 8-3
4 Power PWB 1. Screw ...................... (D1) x4 8-3
4. PWB Holder ........... (D1) x2 8-4
5 Front Panel 1. Screw ...................... (E1) x8 9-1
2. Hook ........................ (E2) x3
6 Display/Switch 1. Screw .......................(F1) x9 9-2
PWB
7 Earphones 1. Screw ...................... (G1) x1 9-2
PWB 2. Bracket .................... (G2) x1
DISASSEMBLY
Figure 8-3
STEP REMOVAL PROCEDURE FIGURE
Figure 8-2
HT-CN400DVW/HT-CN400DVA/HT-CN500DVW/HT-CN500DVA
Caution on Disassembly
Follow the below-mentioned notes when disassembling
the unit and reassembling it, to keep it safe and ensure
excellent performance:
1. Take dvd disc out of the unit.
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit.
3. Take off nylon bands or wire holders where they need to
be removed when disassembling the unit. After servicing
the unit, be sure to rearrange the leads where they were
before disassembling.
4. Take sufficient care on static electricity of integrated
circuits and other circuits when servicing.
HT-CN400DVW/HT-CN400DVA/HT-CN500DVW/HT-CN500DVA
Pull
Pull
(A1)x5
ø3x6mm
(A1)x1
ø3x6mm
(A1)x1
ø3x6mm
Rear Panel
Top Cabinet
Front
Panel
Figure 8-1
(D1)x4
ø3x8mm
(C1)x5
ø3x8mm
(C2)x1
Washer
Front
Panel
Loading Tray
Mechanism
Main PWB
Power PWB
PushPush
(C6)x4
Figure 8-4
To Next Page
Loading...
