Sharp HT-CN410DVH - Page 52

HT-CN410DVH
52
IC201, Programmable Multimedia and DSP Processor (ES6809PADF)
Table 1 ES6809 Pin Description (Continued):
Names Pin Numbers I/O Definitions
AVDD3 169 P
3.3V analog power for flash.
AVSS 170 G
Analog ground for flash.
DVCC 171 P
1.8V power for flash.
IP1 172 I
DVD-RAM header position index 1.
IDSEL 173 I/O
DVD-RAM detected signal of ID area.
AMPSTBY 174 O
Power amplifier standby.
FGIN 175 I
Spindle hall sensor input.
CLOSESW 176 I
Tray closed detector.
HOMESW 177 I
Sled home switch position detector.
CLOSE 178 O
Drive to open tray.
OPENSW 179 I
Tray open detector.
OPEN 180 O
Drive to open tray.
MDET 181 I
Spindle drive motor rotation direction detect.
AUX7 184 I/O
Auxiliary port 7.
AUX3[7]
185
I/O
Aux3 data I/O 7.
CAMIN7 I/O
Camera I/O 7.
EAUX1 186 I/O
Extended auxiliary port 1.
AUX3[6]
187
I/O
Aux3 data I/O 6.
CAMIN6 I/O
Camera I/O 6.
EAUX0
188
I/O
Extended auxiliary port 0.
CAM_CLK I/O
Camera clock.
EAUX3
189
I/O
Extended auxiliary port 3.
PCLKQSCN O
13.5-MHz video output pixel clock.
AUX4[1] I/O
Aux4 data I/O; (5V tolerant input).
EAUX2
190
I/O
Extended auxiliary port 2.
PCLK2XSCN I/O
27-MHz video output pixel clock.
AUX4[0] I/O
Aux4 data I/O 0.
VSYNC#
191
I/O
Vertical sync (active-low); (5V tolerant input).
AUX1[7] I/O
Aux1 data I/O 7.
HSYNC#
192
I/O
Horizontal sync (active-low): (5V tolerant input).
AUX1[6] I/O
Aux1 data I/O 6.
XI 193 I
Crystal clock in.
XO 194 O
Crystal clock out.
AUX3[4]
198
I/O
Aux3 data I/O 4.
CAMIN4 I/O
Camera I/O 4.
AUX3[1]
199
I/O
Aux3 data I/O 1.
CAMIN1 I/O
Camera I/O 1.
AUX3[3]
200
I/O
Aux3 data I/O 3.
CAMIN3 I/O
Camera I/O 3.
AUX3[2]
203
I/O
Aux3 data I/O 2.
CAMIN2 I/O
Camera I/O 2.
AUX6-4, 2 204-207 I/O
Auxiliary ports 2,4,5 and 6; (5V tolerant input).