Sharp HT-CN650DVW - DVD Operation; DVD Playback

27
HTCN650DVW_AUS.fm03/10/29
F
S
V
I
N
P
E
E
HT-CN650DVW
DVD Operation
- DVD playback -
DVD playback
Turn on the TV, and switch the input to the “VIDEO 1”, “VIDEO 2”, etc.
accordingly.
 Playback
Note:
During operate FM/AUX, OPEN/CLOSE CD tray will change to DVD function.
ON STAND-BY OPEN CLOSE
PRESET MUTE PRESET
OSDPLAYSLOW
TUNING TUNINGSTOP
PAUS E
TITLE
SETUP
ENTER
FUNCTION
MENU
PBC
RETURN
LISTENING
EQUALIZER PROG
MODE
ECHO
MIC
VOLUME
ANGLEZOOMSUBTITLEAUDIO
SLEEP DIRECT REPEAT A-B
123
456
78
0
9
OPEN CLOSE
ON STAND-BY
STOP
FUNCTION
PLAY PAUSE
1 Press the ON/STAND-BY button to turn the power on.
2 When the input is not set to the disc mode,
press the FUNCTION button repeatedly to
display the startup screen.
The startup screen appears.
3 Press the OPEN/CLOSE button to open the disc tray.
4 Place the disc on the disc tray, label side up.
Be sure to place 8 cm (3") discs in the middle of the disc position.
5 Press the OPEN/CLOSE button to close the disc tray.
Discs supporting auto start will start to play once you close the disc tray even if
you do not press the PLAY/PAUSE ( ) button.
6 If playback does not start in step 5, press the PLAY/PAUSE
( ) button.
No Disc
Label side
Disc tray