Sharp HT-SB140 User Manual

8
 If a TV or an external device (Only for AUX
socket) is connected, the unit will switch
on automatically when the TV or the
external device is switched on.
 When the unit has no input signal for
over 15 minutes, it will automatically
switch to Standby mode.
Select Modes
Press the button on the unit
repeatedly or press the AUX, BT
(Bluetooth), OPTICAL, HDMI ARC buttons
on the remote control to select the
desired mode.
•
Red indicator: In STANDBY mode.
•
Green indicator: In AUX mode.
•
Orange indicator: In Optical mode.
•
Blue indicator: In Bluetooth mode.
•
•
White indicator: In HDMI ARC mode.
Adjust the Volume
 Press the + / - buttons on the unit or
press the VOL+ / VOL- buttons on the
remote control to adjust the volume.
 If you wish to turn the sound o ,
press the MUTE button on the remote
control. Press the MUTE button again or
press the VOL+ / VOL- buttons on the
unit or on the remote control to resume
normal listening.
 While adjusting the volume, the status
indicator  ashes quickly.
 While the volume level reaches its
maximum level, if you press the VOL+
button again, the status indicator
 ashes once. While the volume level
reaches its minimum level, if you press
the VOL- button again, the status
indicator  ashes once.
Select Equaliser (EQ) E ect
• While playing, press the NEWS or
MOVIE or MUSIC buttons on the remote
control to select between preset equali-
sers: Movie (recommended for viewing
movies), Music (recommended for lis-
tening to music), NEWS (recommended
for listening to NEWS).
AUX/OPTICAL/HDMI ARC
1. Ensure that the unit is connected to
the TV or audio device.
2. While in ON mode, press the
button on the unit repeatedly or press
the AUX, OPTICAL, HDMI ARC buttons
on the remote control to select the
desired mode.
3. Operate your audio device directly for
playback features.
4. Press the VOL +/– button to adjust the
volume to your desired level.
TIP:
While in HDMI ARC/OPTICAL mode, if
there’s no sound output from the unit
and the HDMI ARC/OPTICAL lights  ashes
quickly, you may need to activate PCM
signal output on your source device (eg.
TV, DVD or Blu-ray player).
Bluetooth Operation
Pair Bluetooth-enabled Devices
The  rst time you connect your Bluetooth
device to this player, you need to pair
your device to this player.
NOTE:
 The operational range between this
player and a Bluetooth device is
approximately 8 meters (without any
object between the Bluetooth device
and the unit).
 Before you connect a Bluetooth device
to this unit, ensure you know the
device’s capabilities.
 Compatibility with all Bluetooth de-
vices is not guaranteed.
 Any obstacle between this unit and
a Bluetooth device can reduce the
operational range.
 If the signal strength is weak, your
Bluetooth receiver may disconnect,

Sharp HT-SB140 Specifications

General

Number of drivers	1
Speaker placement	Stand-mountable
Number of speakers	-
Audio output channels	2.0 channels
Equalizer modes	Country (music), Grave (music)
RMS rated power	150 W
Audio Return Channel (ARC)	Yes
Wi-Fi	No
Bluetooth version	4.2
Connectivity technology	Wired & Wireless
Product type	Stereo portable speaker
Product color	Black
Product design	Soundbar
Certification	CE, CB, ErP
Recommended usage	Universal
AC input voltage	220-240 V
Power source type	AC
AC adapter frequency	50 Hz
AC adapter input voltage	220 - 240 V
Power consumption (typical)	0.5 W
Quantity per pallet	1 pc(s)

Weight and Dimensions

Width	950 mm
Height	63 mm
Weight	1300 g
Dimensions (WxDxH)	950 x 63 x 63 mm