EasyManuals Logo

Sharp HT-SB140 User Manual

Sharp HT-SB140
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
2
This product does not contain any parts that are serviceable by the user. In case
of a fault, contact the manufacturer or authorised service department. Exposing
the internal parts inside the device may endanger your life. The manufacturers
guarantee does not extend to faults caused by repairs carried out by unauthorised
third parties.
Do not use this product immediately after unpacking. Wait until it warms up to
room temperature before using it.
Ensure this product is used in moderate climates only (not in tropical/subtropical
climates).
Place product on a  at, stable surface that is not subject to vibrations.
Ensure the product and its parts is not overhanging the edge of the supporting
furniture.
To reduce the risk of fire, electric shock or damage to this product, do not expose it
to direct sunlight, dust, rain and moisture. Never expose it to dripping or splashing
and do not place objects filled with liquids on or near the product.
Do not place objects  lled with liquids, such as vases, on the apparatus.
Do not install near any heat sources such as radiators, heat registers, stoves, or other
apparatus (including ampli ers) that produce heat.
Do not place the product where the humidity is high and ventilation is poor.
Ensure a minimum distance of 5 cm around the apparatus for su cient ventilation.
Do not block any ventilation openings of this product. Always ensure that the
ventilation openings are not covered with items such as newspapers, table-cloths,
curtains, etc.
NEVER let anyone, especially children, push anything into holes, slots or any other
openings in the unit’s casing as this could result in a fatal electric shock.
Storms are dangerous for all electric appliances. If the mains or aerial wiring is struck
by lightning, the appliance might get damaged, even if it is turned o . You should
disconnect all the cables and connectors of the appliance before a storm.
Excessive sound pressure from earphones and headphones can cause hearing loss.
Maintenance
Unplug the power cable from the power source before cleaning the appliance.
Use a soft and clean rag to clean the outside of the unit. Never clean it with chemi-
cals or detergent.
Batteries
Observe the correct polarity when inserting the batteries.
Do not expose batteries to high temperatures and do not
place them on locations where the temperature might increase
quickly, e.g. near the  re or on the direct sunshine.
Do not expose batteries to excessive radiant heat, do not throw
them into the  re, do not disassemble them and do not try to
recharge un-rechargeable batteries. They could leak or explode.
Never use di erent batteries together or mix new and old ones.
When the Remote Control is not to be used for a long time
(more than a month), remove the battery from the Remote Control to prevent it
from leaking.
Cd

Other manuals for Sharp HT-SB140

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Sharp HT-SB140 and is the answer not in the manual?

Sharp HT-SB140 Specifications

General IconGeneral
Number of drivers1
Speaker placementStand-mountable
Number of speakers-
Audio output channels2.0 channels
Equalizer modesCountry (music), Grave (music)
RMS rated power150 W
Audio Return Channel (ARC)Yes
Wi-FiNo
Bluetooth version4.2
Connectivity technologyWired & Wireless
Product typeStereo portable speaker
Product colorBlack
Product designSoundbar
CertificationCE, CB, ErP
Recommended usageUniversal
AC input voltage220-240 V
Power source typeAC
AC adapter frequency50 Hz
AC adapter input voltage220 - 240 V
Power consumption (typical)0.5 W
Quantity per pallet1 pc(s)
Weight and Dimensions IconWeight and Dimensions
Width950 mm
Height63 mm
Weight1300 g
Dimensions (WxDxH)950 x 63 x 63 mm

Related product manuals