10
Press MUTE on the remote control to
ensure the soundbar is not muted.
Press source buttons to select a di erent
input source.
When using either of the Digital input, if
there is no audio:
Try setting the TV output to PCM or
Connect directly to your Blu-ray/other
source, some TVs do not pass through
digital audio.
Your TV may be set to variable audio
output. Con rm that the audio output
setting is set to FIXED or STANDARD, not
VARIABLE. Consult your TV’s user manual
for more detailed information.
If using Bluetooth, ensure that the volume
on your source device is turned up and
that the device is not muted.
Remote control does not work
Before you press any playback control
button, rst select the correct source.
Reduce the distance between the remote
control and the unit.
Insert the battery with its polarities (+/-)
aligned as indicated.
Replace the battery.
Aim the remote control directly at the
sensor on the front of the unit.
I hear buzzing or humming
Ensure all cables and wires are securely
connected.
Connect a di erent source device (TV,
Blu-ray player, etc) to see if the buzzing
persists. If it does not, the problem may
be with the original device.
Connect your device to a di erent input
on the soundbar.
I can’t nd the Bluetooth name of this
unit on my Bluetooth device
Ensure the Bluetooth function is activated
on your Bluetooth device.
Re-pair the unit with your Bluetooth
device.
This is a 15 mins power o function,
one of the ERPII standard requirement
for saving power
When the unit’s external input signal
level is too low, the unit will be turned
o automatically in 15 minutes. Please
increase the volume level of your external
device.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
