EN-12
START/STOP
START STOP
♪ ♪
〜
NOTE
• When the product starts operating the operation
starts in the previous mode it was operated in.
SELECT AIR VOLUME
AND MODE
♪
♪
♪
♪♪
♪
♪
LOW
MED
MAX
AUTO
POLLEN
SLEEP
AUTO:
The fan speed is automatically switched depending
on the amount of impurities in the air.
You can select humidification ON / OFF.
POLLEN:
The Sensitive Dust Sensor sensitivity is
automatically increased and the Sensitive Dust
Sensor quickly detects impurities such as dust and
pollen and cleans the air powerfully.
SLEEP:
The product will operate quietly, and the fan speed
will automatically EHVZLWFKHG depending on the
amount of impurities in the air and room brightness.
When the Light Control is set to “Auto”, the Display
and Cleanliness Indicator will automatically go off.
SHARP COCORO AIR
MODE
♪
When the product is connected to Sharp
Cloud
Sharp Cloud will analyze and set the optimal
operation for your room based on the information
retrieved from sensors on the product and your
usage records.
When the product is not connected to
Sharp Cloud
The fan speed and the humidification ON / OFF
are automatically controlled depending on the six
detection. (PM2.5 / Usual dust / Odor / Temperature
/ Humidity / Light)
NOTE
• If you press the Humidify ON/OFF Button, the
operation mode will change to
(AUTO).
HAZE MODE
Operates at HIGH fan speed for 60 minutes and
then alternates between Low and High level for
20 minutes each.
♪
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
NOTE
• The Plasmacluster ion cannot be turned “OFF”.
To Next Page
Loading...
