10
● Press (MAIN POWER).
• The STANDBY/ON indicator instantly changes from red to
green and the LCD TV set is turned on.
• The on-screen display appears for a few seconds after turning
on the main power.
On-screen display
● To turn off the main power, press (MAIN POWER)
again.
STANDBY/ON
To turn off the LCD TV
Press
BB
BB
B (Power).
• The STANDBY/ON indicator will turn red.
To turn the LCD TV back on
Press
BB
BB
B (Power) again.
• The STANDBY/ON indicator will turn green.
Turning On and Off the Main Power
STANDBY/ON indicator
(MAIN POWER)
Basic Operation
Switching the Input Mode (EXT1/EXT2/TV)
Turn on the power of the connected devices.
Press
( )/( ) (Input) to select the applicable
input source.
• The screen changes in order of EXT1, EXT2 and TV mode
each time ( )/( ) (Input) is pressed.
• EXT1: Select this mode when viewing the signals from the video
equipment connected to the EXT1 (21-pin Euro-SCART
(RGB)) terminal.
• EXT2: Select this mode when viewing the signals from the video
equipment connected to the EXT2 terminals using the
VIDEO or S-VIDEO terminal for video input.
If both VIDEO and S-VIDEO terminals are connected with
cables, the S-VIDEO input terminal is selected as the high
priority.
EXT2 mode
TV mode
EXT1 mode
1
2
LC-13_15_20SH1E_E_P10-14.p65 2004.12.20, 6:29 PM10
To Next Page
Loading...
Need help?
General