21
Useful Features (Continued)
Backlight
You can make the setting for the brightness of the screen.
Press MENU to display the Menu screen.
Press \/| to select “Features”.
Press '/" to select “Backlight”, and press OK.
Press '/" to select the desired mode, and press OK.
Press END to exit.
* The Backlight setting can be switched with one touch using the remote
control (see below).
■ Directly setting the Backlight
You can change the setting of Backlight directly.
Press BACKLIGHT to select the desired mode.
• Each time you press BACKLIGHT, the mode changes as follows.
Backlight:Bright
Backlight:Medium
Backlight:Auto(OPC)
Backlight:Dark
• See the table above for details of the each brightness setting.
• When set to “Auto (OPC)”, make sure that no object obstructs the
OPC sensor, which could affect its ability to sense surrounding light.
Sleep Timer
You can set “Sleep timer” to automatically turn off the LCD
TV set.
Perform steps 1 and 2 in Backlight to display the
Features Menu screen.
Press '/" to select “Sleep timer”, and press OK.
Press Channel Select or
'/"
to select the time, and
press
\/|
. Press
'/"
to set “On”.
Press END to exit.
• Be sure to adjust the clock with “Clock setup” in the Setup Menu
before setting “Sleep timer”.
• The time is automatically set/corrected via the Teletext broadcast
when available.
• When not using the LCD TV set for a long period of time, turn off
the main power.
Auto Power Off
You can set the power to automatically turn off if there is no
signal for 5 minutes.
Perform steps 1 and 2 in Backlight to display the
Features Menu screen.
Press '/" to select “Auto power off”, and press OK.
Press '/" to select “On”, and press OK.
Press END to exit.
• “Off” is factory preset value.
1
Description
The LCD TV set automatically
turns off.
Input value/Choice
HH:MM
Off On
Selected item
Sleep timer
Current Time
Choice
[Medium] Suitable for viewing in
well-lit areas. Saves
energy.
[Dark]
Sufficiently bright when
viewing in dim areas.
[Auto (OPC)] Screen brightness is
adjusted according to the
ambient light of the room.
Factory setting
[Bright] Maximum
brightness
Selected item
Backlight*
1
2
3
4
5
1
2
3
4
1
2
3
4
LC-13_15_20SH1E_E_P19-24.p65 2004.12.20, 6:30 PM21
To Next Page
Loading...
Need help?
General