18
Useful Features (Continued)
Rotate
You can set the orientation of the picture.
Press MENU to display the Menu screen.
Press \/| to select “Setup”.
Press '/" to select “Rotate”, and press OK.
Press '/" to select the desired mode, and press OK.
Normal
Mirror
Rotate
Upside down
Press END to exit.
■ Directly setting the Rotate
Press ROTATE to select the desired mode.
• Each time you press ROTATE, the mode changes as follows.
• “Rotate” is set to “Normal” at the factory setting.
[Upside down]: To display upside
down images for special uses.
[Rotate]: To display rotated
images for special uses.
[Mirror]: To display mirror
images for special uses.
[Normal]: Normal image
orientation.
Rotate: Upside down
Rotate: Normal
Rotate: Mirror
Rotate: Rotate
2
3
5
4
Using the Programme Table
The Programme table shows a list of all receivable pro-
grammes. They are located in channels 0 to 199.
To select the desired programme
Press OK to display the Programme table.
Press '/"/\ /| to select the desired programme.
• To display the next or previous list of the Programme table,
press '/" when the cursor is at a programme in the lower-
right or upper-left position, or press \/| when the cursor is
at a programme in the right or left column.
8 E- 9 16 E- 54
1 S- 6 9 E- 1 17 E- 56
2 S- 8 1 E- 11 18 E- 57
3 S- 1 11 E- 36 19
4 S- 11 12 E- 37 2
5 E- 3 13 E- 38 21
6 E- 5 14 E- 5 22
7 E- 6 15 E- 53 23
0
0
0
0
0
0
Press OK to display the selected programme.
Press END to exit.
1
3
4
2
1
LC-13_15_20SH1E_E_P15-18.p65 2004.12.20, 6:30 PM18
To Next Page
Loading...
Need help?
General