LC-32D44U
5 – 12
7. Code list for Standby Cause
Code Indication Description
1 RC_STNBY /* Standby set by remote control */
2 NO_OPERT /* Off caused by no operation */
3 NO_SIGNA /* Off caused by no signal */
4 PC_MODE1 /* Set by the PC power management mode 1 */
5 PC_MODE2 /* Set by the PC power management mode 2 */
6 SLEEP_TM /* Set by off timer */
8 OFF_232C /* Set by the command from RS232C */
9 AVC_TACT /* Set by the front switch at the AVC center */
A BSBOOKED /* The pre-set time has passed since TV was turned on from standby by the BS timer. */
B E_MONIPW /* Monitor main power failure detected */
10 E_CCKMVT /* Abnormal voltage of CCKM line detected */
11 OUT_OF_R “/* While a PC display is on, unspecified input continued long time. */”
12 E_NOMONI /* Incompatible monitor is connected to the AVC center. */
14 E_AVCFAN /* Fan failure at the AVC center */
15 E_BSSUBM /* Communication failure with the BS sub microcomputer (Not used) */
16 E_CVICIC /* CVIC failure */
17 E_AVCTMP /* Abnormal temperature at the AVC center */
18 E_1BITAU /* 1Bit-AMP failure */
1A E_MONITR /* Monitor problem detected */
1B E_FNLOCK /* Fan lock for North America */
40 E_DSDEV /* Failure in Digital Standby */
To Next Page
Loading...
Need help?
General