30
LC-26GA5E
LC-32GA5E
LC-26P55E
LC-32P55E
LC-37P55E
6. Check the connection between TV set and PC, sending a wrong command, as for example: “aaa”. TV set returns
an “err” label as an syntaxes ERROR (Not correct order or sequence).
Send a “DWMD” (capital letters) command to enter TV set in Download Mode.
Change a baud rate to 115200.
Select: Setup
⇒ Baud rate ⇒ 115200 ⇒ O.K.
5. Select follows settings:
Serial port to use: COM x
Baud rate: 9600
Data: 8 bits
Parity: none
Stop: 1 bit
Flow control: none
Enter O.K.
7. Select: File ⇒ Transfer ⇒ XMODEM ⇒ Sent
To Next Page
Loading...
