10
LC-32HT1U
Preparation
“Off” is selected in OPC setting
“On” or “On: Display” is selected in OPC setting
Simple operations for watching a TV program
Turning on the power
TV status indicator (POWER)
POWER indicator
Press POWER on the TV.
• POWER indicator (Blue): The TV is on. (After a few seconds, an
image appears with sound.)
Turning off the power
Press POWER on the TV.
• The TV enters standby mode and the image on the screen
disappears.
• The POWER indicator on the TV gradually turns off.
NOTE
• If you are not going to use this TV for a long period of time, be
sure to remove the AC cord from the power outlet.
Lights off
Lighting (Green)
ON
OFF/Standby
Lighting (Blue)
Lights off
TV status indicator (OPC)
*OPC: Optical Picture Control
POWER
OPC indicator
For hotel guests, use the remote control unit supplied by the Pay Per View provider to
operate the TV.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE AQUOS TELEVISION FROM THE OUTLET AND REPEAT
THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
Appendix
Removing the speakers
1
2
3
Remove the terminal covers.
Perform the same steps for both sides.
Unfasten the screws.
Perform the same steps for both sides.
Unplug the speaker cable.
Perform the same steps for both sides.
CAUTION
• Do not remove the stand and speakers from the TV unless using an optional bracket to mount it.
• Before performing work, spread cushioning over the base area to lay the TV on. This will prevent it from being
damaged.
NOTE
• To re-attach the speakers, perform the steps in reverse order.
4
Lift, then remove the speaker box from the TV.
To Next Page
Loading...
Need help?
General
