LC-40D68UT
5 – 24
8. Initialization of factory settings
8.1. Making factory settings
Use the adjustment remote controller for the factory settings.
8.1.1 Press the ENTER key at the INDUSTRY INT on Adjustment Process Page1 which is selected “YES”.
8.1.2 Sever seconds later, “SETTING COMPLETE” “TV VER *.**” appears at the center of the screen.
If background of screen is green, the settings are complete.
8.1.3 Power off the set.
NOTE: Do not turn on the power once the factory settings have been made. Otherwise the factory setting must be made again.
SETTING COMPLETE
TV VER
*
.
**
To Next Page
Loading...
