Setting the System in place
Handling the Display
CAUTION
•Do not remove the stand and speaker from the Display unless
using an optional bracket to mount it.
•Keep enough space above and behind the Display.
•When you move the System, carry it by two or more people.
•When you move the Display, hold the side portion of the Display,
not the speaker.
Handling the AVC System
CAUTION
•Do not put a VCR or other device on the AVC System.
•Keep enough space above and on the sides of the AVC System.
•Do not block the ventilation openings on the top and left side, and
the exhaust fan on the right side.
• Do not spread a thick cloth beneath the AVC System, or cover it
with one, as this can cause overheating and result in malfunction.
Where to place the System
“System” means the Display and AVC System. First select the location where to place the System.
Selecting the location of the System
• The Display and the AVC System are connected by the system cable.
• Select a place with good ventilation.
Keep enough space
System cable
AVC System
Display
There is an
exhaust fan on
the right side.
1
2
4 inches
(10 cm)
or more
2 inches
(5 cm) or more
2 inches
(5 cm) or
more
CAUTION
Adjust the screen with both
hands. Put one hand on the
Display and rotate the
screen while steadying the
stand with your other hand.
You can adjust the screen
horizontally up to 10 de-
grees. Please note that you
cannot adjust the screen
vertically with this model.
Preparation
To Next Page
Loading...
Need help?
General
