33
TU-GD10U-T
TU-45GAD/T
LC-45GX6U/D/T
UPGRADING OF EACH MICROPROCESSOR SOFTWARE
Caution: Never "POWER OFF" the unit when software upgrade is ongoing.
Otherwise the system may be damaged beyond recovery.
1.Software version upgrade
The model employs the following software.
» Main software
» Monitor microprocessor software
» Card microprocessor software
The main software and the monitor microprocessor software can be upgraded by using a general-purpose SD
memory card.
The card microprocessor software can be upgraded by using a PC card. The followings are the procedures
for upgrading, explained separately for each of the main software, the monitor microprocessor software and
the card microprocessor software.
2. Main software version upgrade
Get ready before you start
» SD memory card of 16MB or higher capacity
» PC running on Windows 98/98SE/ME/2000/XP operating system
» SD memory card reader/writer with USB connectivity and PC card adapter
» SD memory card formatting software
(Downloadable at http://panasonic.jp/support/audio/sd/download/sd_formatter_e.html)
Preparations
To upgrade the main software, it is necessary to get ready the SD card for version upgrade before you start.
Follow the steps below and create the SD card for version upgrade.
1 Insert the SD card into the SD card reader/writer. Start the SD card formatting software. Click [Format].
(When you have the drive options, select the drive where the SD card is inserted before you proceed.)
To Next Page
Loading...
Need help?
General
