Sharp LC-46LE631E - 4 Set up Your TV; Settings Assistant; Picture and Sound

EN 30
4 Set up your TV
Settings assistant
Use the settings assistant to guide you
through the picture and sound settings.
1. While you watch TV, press MENU.
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.
Picture and sound
More picture settings
1. Press MENU.
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
 [Smart picture]: Access predefined
smart picture settings.
 [Reset]: Reset to default settings.
 [Contrast]: Adjust the intensity of the
bright areas, keeping dark areas
unchanged.
 [Brightness]: Adjust the intensity and
details of the dark areas.
 [Colour]: Adjust colour saturation.
 [Hue]: Compensate colour variations in
NTSC encoded transmissions.
 [Sharpness]: Adjust sharpness in the
image.
 [Noise reduction]: Filter and reduce
noise in the image.
 [Tint]: Adjust the colour balance in the
image.
 [Custom tint]: Customise tint setting.
 [Brilliant Colour Processor +]: Access
advanced settings, including [Fine
motion], [100Hz double frame
driving], [Advanced sharpness],
[Dynamic contrast], [Dynamic
backlight], [MPEG artefact reduction],
[Colour enhancement], [Gamma].
 [PC mode]: Allow picture settings to
be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content.
 [Light sensor]: Adjust settings
dynamically to match lighting conditions.
 [Picture format]: Change the picture
format.
 [Screen edges]: Change the picture
size.
 [Picture shift]: Adjust the position of
the picture. You cannot select this
setting if the selected picture format is
Auto zoom or Wide screen.
More sound settings
1. Press MENU.
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:
 [Smart sound]: Access predefined
smart sound settings.
 [Reset]: Reset to factory default
settings.
 [Bass]: Adjust the bass level.
 [Treble]: Adjust the treble level.
 [Surround]: Enable spatial sound.
 [Headphones volume]: Adjust
headphone volume.
 [Auto volume leveling]: Automatically
reduce sudden volume changes, for
example when switching channels.
 [Balance]: Adjust the balance of the left
and right speakers.