Sharp LC-55P6000U

23
ENGLISH
FRANÇAIS ESPAÑOL
CEC Function:
Configure how to control CEC-enabled devices with your TV remote.
•
CEC Control:
Allow CEC-enabled devices that are connected to HDMI ports to control the TV.
•
Device Auto Power Off:
Allow CEC-enabled devices to turn off with the TV.
•
TV Auto Power On:
Allow the TV to turn On with CEC-enabled devices.
•
Audio Receiver:
Allow the Audio Receiver to send audio over an HDMI cable and back to or from your TV.
•
CEC Device Lists:
View a list of all CEC-enabled devices.
•
Device Connect:
Allow connected devices to the HDMI ports to communicate back and forth with the TV.
NOTES
• HDMI cables must be used to connect HDMI CEC-compatible devices to your TV.
• The HDMI CEC feature of the connected device must be turned on.
• If you connect an HDMI device that is not HDMI CEC-compatible, all the HDMI-CEC Control features do not work.
• Depending on the connected HDMI device, the HDMI-CEC Control feature may not work.
HDMI 2.0 Format:
Match the connected device output format. Select Enhanced for devices of 4K, 60Hz, 4:4:4 4:2:2
or 4:2:0, 10 bit and above.
TV Name:
Choose a name for your TV. The name will be shown to devices that are available for sharing data.
Application Settings:
Set settings for apps on your TV.
•
AnyviewStream:
Share video, music or other content from another device on to your TV screen.
•
Netflix:
Remove this TV from your Netflix account. Please contact Netflix if you want to stop being billed for your
service.
•
VUDU:
Remove this TV from your VUDU account. Please contact VUDU if you want to stop being billed for your
service.
Advanced Settings:
Access the Advanced Settings menu.
•
Power LED:
Set the power indicator light to stay On or Off when standby mode.
•
Audio Only:
Turn off the screen display to save energy. Press any button except the
[
]
button,
Volume [+/-]
buttons and
[
]
button to turn the picture back on.
•
Input Labels:
Edit the input labels.
•
Default Live TV Source:
Set up a source as the default source, which is launched with the Live TV button.
•
Screensaver:
Select to show an active screensaver when the TV is idle.
•
Notifications:
Allow pop-up notifications to appear for useful information and events that occur with your TV.
•
Send Diagnostics and Usage:
Send TV running errors and usage statistics to the server to improve service
quality (No personal information is collected).
•
Use Mode:
Set the TV to use in Home or Store Mode (Some models have a Store Mode with 4K Video).
Setup Wizard:
Use the Setup Wizard for instructions to help you set up your TV.
Support Menu
About:
View system information.
Disclaimer:
Click to read the Disclaimer details.
Check Firmware Upgrade:
Check to ensure that your TV has
received the latest firmware.
Signal Diagnosis:
Check diagnostic information for current input
source.
Reset To Default:
Reset your TV back to the factory default.
Support
View System information
About
Disclaimer
Check Firmware Upgrade
Signal Diagnosis
Reset To Default