Sharp LC-60LE857U User Manual

Connecting to External Equipment
m When connecting an AV amplifier for a surround system Refer to page 45 for a list of PC signals compatible with the IV.
HD Cable/Satellite set-top box [] When using an HDMI cable (HDMI iN 1,2, 3 or 4):
HDMI-certified cable "1
HDMI-certified cable
Optical fiber cable *2
* Letting the TV output the audio to an AV amplifier:
"1 When you connect ARC-compatible equipment, use the HDMI iN 1 terminal.
*2 If the equipment to be connected is not compatible with the ARC, connect an optical fiber cable.
* If the image is not in sync with the audio, check the settings of the connected surround system.
[] When connecting an audio ampJifier
It is possible to output audio through the DiGiTAL AUDIO OUT terminal. (See page 26 for details.)
Optical fiber cable
Q3.5 mm stereo minijackto RCA audio cable
* Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified
cable to the HDMI iN 2 terminal, connect a © 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio
Select" to "HDMl+Analog". (See page 44.)
* The HDMI IN terminals only support digkal signal.
[] When using a DVI-HDMI conversion cable (HDIVll IN 2}:
DVI-HDMI conversion cable
* When using a DVI-HDMI conversion cable, you should make an analog audio connection, in this case, in addkion to
connecting a DVI-HDMI conversion cable to the HDMI IN 2 terminal, connect a @ 3.5 mm stereo minijack cable to
the AUDIO IN terminal and set "Audio Select" to "HDMl+Analog". (See page 44.)
[] When using an anaJog RGB cable (PC iN):
Analog RGB cable
(D-sub 15-pin cable or VGA cable)
© 3.5 mm stereo minijack cable
* See page 27 for details on the Output Select function.
* When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.
* When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 44.)
@9" 15

Sharp LC-60LE857U Specifications

General

Display diagonal	60 \
LED backlighting type	Edge-Lit LED
Supported video modes	1080p
Contrast ratio (dynamic)	12000000:1
Screen format adjustments	16:9
Viewing angle, horizontal	176 °
Supported graphics resolutions	1920 x 1080 (HD 1080)
3D	Yes
3D type	Active
Built-in camera	No
Bundled software	Smart Apps, Web Browser, Web+TV Split Screen, Skype, Remote Control Apps (iOS/Android)
3D glasses quantity	2
Placement supported	Horizontal
Tuner type	Analog & digital
Number of tuners	2 tuner(s)
Analog signal format system	NTSC
Digital signal format system	ATSC
RMS rated power	20 W
DVI port	-
HDMI ports quantity	4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Component video (YPbPr/YCbCr) in	1
Wi-Fi standards	802.11a, 802.11b, 802.11g
Lifestyle apps	Skype
Number of OSD languages	3
On Screen Display (OSD) languages	ENG, ESP, FRE
Product color	Silver
Panel mounting interface	400 x 200 mm
AC input voltage	120 V
AC input frequency	60 Hz
Power consumption (standby)	- W
Power consumption (typical)	187 W
Sustainability certificates	ENERGY STAR
Certification	Think Green
Package depth	203 mm
Package width	1727 mm
Package height	915 mm
Package weight	49000 g

Weight and Dimensions

Depth (with stand)	360 mm
Height (with stand)	837 mm
Weight (with stand)	40000 g
Depth (without stand)	58 mm
Width (without stand)	1378 mm
Height (without stand)	810 mm
Weight (without stand)	33000 g