On=Screen Display Menu
LCFONT embedded
ENERGY STAR:
Except for
LC-90LE657U)
Example [_],,-f_l__ _
_ Guide display
• This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on
the menu setting screen.
• The operations for some selected items may be displayed in the operational guide bar at the bottom of the
screen.
Item displayed in blue
• This indicates the Rein currently selected.
• Press ENTER to go to the adjustment screen for this item.
@_ Item in brackets
• This indicates the current setting for the item.
_4_ Item displayed in white
• This indicates that the item can be selected.
_5_ Item displayed in gray
• This indicates that the item cannot be selected.
There are various reasons why the Reins cannot be selected, but the main reasons are as follows:
-- Nothing is connected to the selected input terminal.
-- The function is not compatible with the current input signal.
[] About Menu items
• When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu
may be changed.
• Some menu Rems may not be displayed depending on the selected input source.
• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may
vary slightly from the actual screens.
• The order of explanations for each menu Rein in the following pages is not necessarily in accordance wRh the
alignment of the Reins on the screen.
_,,,_ LCFONT:
• This product is embedded wkh LC Font technology, which was developed by SHARP Corporation for clearly
displaying easy-to-read characters on LCD screens.
Q- 22
@
1 Press MENU to display the MENU screen.
2 _1} Press 4/_ to select the desired menu.
Press A/V to select a specific adjustment item, and then press ENTER.
* Additional related adjustment items may be displayed. Press A/V to select the desired item.
@} Adjust the item while referring to the guide display.
, Operations vary depending on the function or Rem.Refer to the guide display corresponding to the menu
setting screen for button operations.
3 Press MENU to exit.
• Menu options differ in the selected input modes, but the operating procedures are the same.
Using the remote control
Use the following buttons on the remote control to
operate the menu.
SmartCentral
MENU: Press to open or close the menu screen.
A/Y/4/I_: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or
complete the setting.
RETURN: Press to return to the previous step.
Using the control panel of the TV
You can also operate the menu with the control
panel of the TM,
Button operations on the control panel correspond
to the ones on the remote control as shown below,
MENU: MENU on the remote control,
INPUT: ENTER on the remote control,
CHA/V: Cursor ,_/V on the remote control,
VOL+/- : Cursor 4/_ on the remote control,
To Next Page
Loading...
Need help?
General
Weight and Dimensions
