CONFIDENTIAL – DO NOT COPY
Page 5-2
File No. SG-0000239
QAM system (supporting clear QAM)
IF-output level: 1Vp-p minimum
Frequency: 57.00~861.00 MHz
AV/Composite Video (CVBS) Connector
a. Frequency: H: 15.734KHz V: 60Hz (NTSC)
b. Signal level: Video ( Y + C ):1Vp-p
Sync (H+V):0.3V below Video (Y+C)
c. Impedance: 75
d. Connector type: RCA Jack
Component video Connector
a. Frequency: H: 15.734KHz V: 60Hz (NTSC-480i)
H: 31KHz V: 60Hz (NTSC-480p)
H: 45KHz V: 60Hz (NTSC-720p)
H: 33KHz V: 60Hz (NTSC-1080i)
H: 67.5KHz V: 60Hz (NTSC-1080P)
b. Signal level: Y: 1Vp-p Pb: ±0.350Vp-p Pr: ±0.350Vp-p
c. Impedance: 75
d. Connector type: RCA Jack
Audio in of Video port
a. Signal level: 0.5Vrms
b. Impedance: 47K
c. Frequency Response: 20Hz-20KHz
d. Connector type: RCA L/R
Digital Audio Out (Optical)
a. Peak emission wave length: 630 – 690 nm
b. Transmission Speed: 16M bps (Max)
c. Connector type: Optical fiber transmitter
Analog Audio Out
a. Signal level: 2 Vrms (Max)
b. Impedance: 600
c. Frequency response: 20Hz-20KHz
d. Connector type: RCA L/R
To Next Page
Loading...
Need help?
General