Sharp LC-70UD1U - Page 16

LC-70UD1U
4 – 5
5. Removing of MAIN Unit, DRC/FRC Unit, POWER Unit, LCD CONTROL Unit, LED DRIVE Unit
1. Removing the 8 screws (1) and detach the Terminal Angle Bottom Ass'y (2) and Terminal Angle Side (3).
2. Removing the MAIN Unit (4).
3. Removing the 12 screws (5) and detach the DRC/FRC Unit (6).
4. Removing the 8 screws (7) and detach the POWER Unit (8)
5. Removing the 6 screws (9) and detach the LCD CONTROL Unit (10) and Radiator (11).
6. Removing the 8 screws (12) and detach the LED DRIVE Unit (13).
7. Removing the 12 screws (14) and detach the 2 Stand Angles (15).
Ԙ
Ԙ
Ԙ
Ԙ
Ԙ
Ԙ
Ԙ Ԙ
ԙ6GTOKPCN#PING
˴$QVVQO#UU[
Ԛ6GTOKPCN#PING5KFG
Ԧ5VCPF#PING
Ԧ5VCPF#PING
ԛ/#+07PKV
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
Ԝ
ԝ&4%(4%7PKV
Ԟ
Ԟ
Ԟ
Ԟ
Ԟ
Ԟ
Ԟ
Ԟ
ԟ219'47PKV
Ԡ Ԡ
Ԡ
Ԡ
ԡ.%&%10641.7PKV
Ԣ4CFKCVQT
ԣ ԣ ԣ ԣ
ԣ ԣ ԣ ԣ
Ԥ.'&&4+8'7PKV
ԥ
ԥ