Sharp LC-70UD1U - Page 15

LC-70UD1U
4 – 4
4. Removing of Connectors
1. Disconnect the following connectors from the MAIN Unit. (SB, SP, RA, KM, BT, UB, LW, PD)
2. Disconnect the following connectors from the DRC/FRC Unit. (LW, PQ, FA, FB)
3. Disconnect the following connectors from the POWER Unit. (LA, PD, PQ, PF)
4. Disconnect the following connectors from the LCD CONTROL Unit. (VA,VB, PT)
5. Disconnect the following connectors from the LED DRIVE Unit. (L1, L2, LA)
SB PD
SP
LW
RA
KM
BT
UB
LA
PD
PQ
PF
VA VB
FA FB
PT
PQ
LW
L1
L2
LA