Sharp MD-MS722H

■ To check the remaining
recording time and the total
playing time
Whilst in the stop mode, press the DISP
button on the main unit or the DISPLAY
button on the remote control unit.
● Each time the button is pressed, the
display will change as follows:
Note:
If character information was not originally
recorded on the MiniDisc, nothing will be
displayed.
■ To check the elapsed time
and remaining time of the
track
During playback, press the DISP button on
the main unit or the DISPLAY button on
the remote control unit.
● Each time the button is pressed, the
display will change as follows:
To display the playing time of an indi-
vidual track:
Whilst in the stop mode, turn the jog dial
to display the track number and track
name, and then press the DISP button on
the main unit or the DISPLAY button on
the remote control unit to display the play-
ing time for that track.
● Turn and hold the jog dial to display the
playing time of the next track.
DISP
DISPLAY
Total playing time
Total number of
tracks
Disc name
Remaining recording time
Remaining play time
Track number
Track name
Elapsed playback time
26
MD-MS722H(SUK)