Sharp MD-MS722H

■ To cancel the auto-play
function
When a MiniDisc is inserted, the power will
be turned on automatically, and playback
will begin. You can cancel automatic play-
back.
1 Whilst in the stop mode ...
Hold down the MODE button on the
main unit or move the shuttle switch on
the lower right of the remote control unit
down until "SET UP" appears.
● When you release the button, “BEEP
1 (BEEP ON)” or “BEEP 0 (BEEP
OFF)” will appear.
2 Turn the jog dial until "auto PL (A-PLAY
ON)" appears.
3 Press the MODE button on the main
unit or move the shuttle switch on the
lower right of the remote control unit
down.
● “PL off (A-PLAY OFF)” will appear,
and the auto-play function will be
cancelled.
● To restore the auto-play function, se-
lect “auto PL (A-PLAY ON)”.
4 Press the ■/:OFF button.
● The normal display will reappear.
■ To cancel the auto power
save function
Power consumption can be reduced by
controlling the memory storage time. You
can cancel the auto power save function.
1 Whilst in the stop mode ...
Hold down the MODE button on the
main unit or move the shuttle switch on
the lower right of the remote control unit
down until "SET UP" appears.
● When you release the button, “BEEP
1 (BEEP ON)” or “BEEP 0 (BEEP
OFF)” will appear.
2 Turn the jog dial until "auto PS (AUTO
Psave)" appears.
3 Press the MODE button on the main
unit or move the shuttle switch on the
lower right of the remote control unit
down.
● “PS off (Psave off)” will appear, and
the auto power save function will be
cancelled.
● To restore the auto power save func-
tion, select “auto PS (AUTO Psave)”.
4 Press the ■/:OFF button.
● The normal display will reappear.
About the sound skip guard memory:
During playback, approximately 40 seconds
of information is stored in the semiconductor
memory. Therefore, even when the pickup
cannot read information for a second or two
due to an external shock, the sound will con-
tinue without interruption because the infor-
mation stored in memory is used.
About the auto power save function:
This is a function used to save power when
using the unit with the rechargeable battery or
the alkaline battery. Whilst in the auto power
save mode, 10 - 40 seconds of sound infor-
mation is stored in memory. When the unit is
used in places exposed to excessive vibra-
tion, cancel the auto power save function.
When the auto power save function is dis-
abled, 40 seconds of sound information is
always stored in memory. (When the AC
adaptor or a car adaptor is used, the informa-
tion storage time is always 40 seconds, re-
gardless of the auto power save mode.)
:OFF
MODE
PLAY
MODE
: OFF
Jog dial
37
MD-MS722H(SUK)