Sharp MD-MT866H - Useful Features: Advanced Playback Navigation; Navigating Within Tracks

MD-MT866H/MD-MT866W
– 26 –
: Pre-adjustment Value Check menu
: A signal offset measurement value (setting) : B signal offset measurement value (setting) : E signal offset measurement value (setting) : F signal offset measurement value (setting) : TCRS signal offset measurement value : EF signal measurement value : TCRS signal measurement value : AB signal input measurement value : Pit section adjustment COUT level setting : Groove section adjustment COUT level setting : A-ATT (focus) initial setting
PLAY
R S L T 1
Servo Pre-adjustment Value Check
A H
B H
SKIP UP SKIP DOWN
E H
SKIP UP SKIP DOWN
F H
SKIP UP SKIP DOWN
T H
SKIP UP SKIP DOWN
e f
SKIP UP SKIP DOWN
T C
SKIP UP SKIP DOWN
a b
SKIP UP SKIP DOWN
P C H
SKIP UP SKIP DOWN
G C H
SKIP UP SKIP DOWN
S A
SKIP UP SKIP DOWN SKIP UP SKIP DOWN
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set. * In the specific setting display state the setting change digit changes when the [P-MODE] button is pressed. • In the case of the setupvalue two digits.
1st digit (initial value) 2nd digit
• In the case of the setupvalue three digits.
1st digit (initial value) 2nd digit 3nd digit
* In the specific state the setting changes in the range of "0h to Fh" when the [VOL UP/DOWN] button is pressed.
P-MODE
: B-ATT (focus) initial setting : E-ATT (tracking) initial setting : F-ATT (tracking) initial setting
S B
S E
SKIP UP SKIP DOWN
S F
SKIP UP SKIP DOWN
P-MODE
P-MODE
P-MODE
P-MODE
: ATT Setting Check menu
: Pit section E-ATT (tracking) setting : Pit section F-ATT (tracking) setting : Groove section E-ATT (tracking) setting : Groove section F-ATT (tracking) setting : High-reflection A-ATT (focus) setting
: High-reflection B-ATT (focus) setting
: Low-reflection A-ATT (focus) setting : Low-reflection B-ATT (focus) setting : TCRS-ATT setting
PLAY
R S L T 2
ATT Setting Check
P E
P F
SKIP UP SKIP DOWN
G E
SKIP UP SKIP DOWN
G F
SKIP UP SKIP DOWN
H A
SKIP UP SKIP DOWN
H B
SKIP UP SKIP DOWN
L A
SKIP UP SKIP DOWN
L B
SKIP UP SKIP DOWN
G C
SKIP UP SKIP DOWN
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set. * In the specific setting display state the setting change digit changes when the [P-MODE] button is pressed. • In the case of the setupvalue three digits.
1st digit (initial value) 2nd digit 3nd digit
* In the specific state the setting changes in the range of "0h to Fh" when the [VOL UP/DOWN] button is pressed.
P-MODE
P-MODE
: Test mode normal playback menu : Normal playback mode
@@@@@@: Mode and address indication
PLAY
N O R M A L
Test Mode Normal Playback
@@@@@@
* When the [STOP] button is pressed in specific menu, the "TEST MODE STOP" state is set.